Skip to content

Dropped object near-miss: Crane rest damage

A member has reported an incident in which a section of H-beam steel plate fell from a crane boom rest.  The incident occurred during the booming up of the vessel’s aft crane.  The main hook “headache ball” or hook snagged the adjoining twin fall main block storage structure H Beam (Photo 1).  This caused a 50 cm section of storage structure H-beam steel plate to be damaged (Photo 2).  The H-beam section, weighing 20 kg, fell 40-50 cm into the main hook bucket which is 2 m in depth (Photo 3).  There was a risk potential for the steel plate to have fallen 4.3 m to the vessel deck area below.

Aft crane
Aft crane
Section of H-beam (post collision with headache ball and hook)
Section of H-beam (post collision with headache ball and hook)
Section of damaged H-beam
Section of damaged H-beam

Further investigation of this incident is on-going.  Our member’s initial investigation revealed the following:

  • No Banksman in place for removing the crane from the rest;
  • Ineffective communications between the crane operator and the banksman.

Safety Event

Published: 29 November 2016
Download: IMCA SF 34/16

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.