Mooring near-miss: Lines break during un-docking operation
The Danish safety organisation Seahealth.dk has circulated a near miss incident in which lines parted during undocking operations. A vessel’s mooring lines (double braided synthetic fibre rope 65mm) were used as tug lines (two lines connected to one tug). When the vessel dropped off all the lines from the berth, the tug started pulling the vessel. After about three minutes the two lines parted. There were no crew standing in the area where the tug line was connected. There were no injuries and no damage to the vessel except for the two failed mooring lines.
It will be understood that the potential consequence of this incident could have been a fatality.
Investigation revealed that the mooring ropes bore no sign of damage prior to the incident, and had been in operation since delivery of the vessel in 2005. The same vessel had seven other mooring lines in use of that age.
Members may wish to refer to the following:
- Mooring incidents
- Mooring safety (poster)
- Mooring incidents (video)
Safety Event
Published: 18 April 2016
Download: IMCA SF 10/16
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.