Manufacturing firm fined after worker’s arm injured in roller
The UK Health & Safety Executive (UKHSE) has prosecuted a company responsible for an incident in which a worker’s arm was injured in machinery. The incident occurred when an installation engineer was commissioning a new conveyor belt system. The engineer suffered a broken arm when it was pulled into the machinery.
The investigation by the UK HSE found that there was a lack of effective guarding and isolation procedures on the machinery.
The company was fined £170,000.
For details, see http://press.hse.gov.uk/2016/manufacturing-firm-fined-after-workers-arm-injured-in-roller/?ebul=hsegen&cr=8/05-oct-16
Members may wish to refer to the following incident (search word: guard):
Safety Event
Published: 18 October 2016
Download: 
IMCA SF 28/16
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.