Skip to content

Worker was injured by a fork lift truck

What happened?

A worker wasstruck by a reversing fork lift truck which resulted in him fracturing his pelvis. His employer was prosecuted by the UK Health & Safety Executive (UK HSE) and fined. See the press release on the UK HSE website.

What went wrong? What were the causes?

Investigation by the UK HSE found that the company had:

  • Failed to consider the risk created by vehicles and pedestrians operating in the same area;
  • Failed to implement a traffic management plan to ensure workers and vehicles were adequately segregated;
  • Failed to install physical barriers to clearly segregate pedestrians and vehicles.

An HSE inspector said: “This incident could so easily have been avoided by simply carrying out correct control measures and safe working practices.”

Members may wish to review the following incident:


IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.