MSF: Cut Hand Whilst Cleaning / Hand Safety
The Marine Safety Forum (MSF) has published Safety Alert 21-10 relating to a crew member who suffered an unpleasant cut to the hand whilst engaged in routine cleaning.
What happened
Whilst cleaning cabinets in the galley area, a crew member on a vessel sustained a bad cut to the hand from a sharp edge. This resulted in a section of skin being sliced off. The MSF notes that this was yet another preventable injury caused during a routine job.
During our work and daily lives, we use our hands continuously, our hands are valuable and need proper care. When it comes to protecting different parts of the body from lacerations, hands are the most important. Hand injuries are difficult to repair because of the complexity of the hand.
The MSF notes that most hand injuries can be associated with:
- Working with machinery or equipment;
- The materials being used or the job process being hazardous;
- Hand tools or powered hand tools that may be faulty or improperly used.
The MSF notes that the most common causes of hand injuries are:
- Sharp edges;
- Lack of awareness;
- Disregard for safety procedures;
- Distractions.
Actions/lessons learned
- Whilst cleaning always be aware of sharp edges;
- Ensure safety checks in the galley are performed and if sharp edges are discovered they are removed, or a warning sign is put in place;
- Use most appropriate type of safety gloves for task being performed and check equipment used for cleaning;
- Hand and finger safety to be added to the risk assessments.
IMCA and the MSF think alike on this matter, that hand and finger safety is an area where the greatest focus may be needed. Please STOP and think!! Watch your hands – you’ve only got one set!!
Members may wish to review:
- Are you prepared to work safely? Short video Line of fire
- IMCA poster on hand safety
- Don’t put your finger in the wrong place: failure to isolate equipment causes serious finger injury
- Finger injury: What happens when you DON’T use the right tool for the right job
- Crewman suffers cut to hand – but gloves prevented it being much worse
- Routine task: Badly cut finger changing mop head
- ‘Routine’ task, non-routine result: Finger injury during welding
- Finger injury caused by incorrectly secured console cover
- Hydraulic sample extruder – finger laceration
- LTI: Loss of fingertip and nail
- Line of fire: cutting injury to index finger
- LTI: cut to hand from protruding hose clip (Marine Safety Forum)
- Injury sustained during manual handling of sharp object
- Sharp wire: injury during routine maintenance
Safety Event
Published: 12 July 2021
Download: 
IMCA SF 19/21
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.