LTI: person fell down hatch inside crane pedestal
What happened
Two service engineers where performing an inspection inside a offshore crane pedestal. Inside, there was a ladder running the full height of the crane pedestal, with a hatch on the middle level of the pedestal. The first person went down the ladder, and unintentionally shifted the hatch cover into such a position, that when the second person went down the ladder and stepped onto the hatch cover that had shifted, it caused the hatch cover to tip over and fall to the room below. As a result the second service engineer fell through the hatch.
The engineer hurt his foot and back and had to rest for some weeks, although nothing was broken – only bruising.
What went wrong
- The hatch cover shifted slightly out of position;
- There was a lack of awareness when entering crane pedestal.
What was the cause?
- Poor hatch cover design – cover not secured. It ought to not have been possible to leave the loose hatch in such a position.
Lessons/actions
- Test and check – in this case the cover plate was never fully tested to ensure sure it was safe for unintentional shifting when persons might step on the edges;
- Look for similar hatches – ensure all hatch covers are properly designed and secure to prevent unintentional opening or shifting.
Members may wish to refer to:
- LTI: step into open deck hatch causes fall
- LTI: engineer injured following engine room slip/trip
- Near miss – grating dislodged and fell, leading to crewman slipping
- Lost time injury (LTI): loose grating fell from crane, a man fell through and was injured
- Dropped object fell from crane – Poor communication/lack of awareness/control of work
Safety Event
Published: 10 January 2022
Download: 
IMCA SF 01/22
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.