Cable handling incident
A technician was knocked unconscious when he was struck on the head by a cable. The incident occurred when cable being used to pull the beginning of a 23″ pipeline by a 10 ton air tugger. The technician was trying to get to the other side of the pipe alley by passing beneath the cable when the nylon sling broke causing the cable to recoil and strike him. Fortunately he was not seriously injured.
The contractor involved has prepared procedures to ensure that no-one except designated personnel, is in the pipe alley while pipe is being pulled.
The incident also highlights the importance of the use of correct rigging. The pulling head at the beginning of the pipeline should have had a shackle attached to it instead of a nylon sling.
Safety Event
Published: 1 January 1998
Download: 
IMCA SF 01/98
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.