Termination of elastic shock cords
We have recently learnt of a near miss where an ROV supervisor used an elasticated shock cord (bungee cord) to secure a television monitor in place. The cord was terminated with a hook-type device but the cord itself was looped back on itself and clamped with a clip.
When the cord was stretched to the second firing point, the clip failed to hold, resulting in it pulling through the hook and spinning out violently, narrowly missing the supervisor’s face.
The company involved has undertaken the following actions:
- replace, wherever practical, all bungee cords
- if bungee cords are the only practical solution, ensure that a figure of eight knot is tied in the cord to prevent it being pulled through the hook end termination unit.
Safety Event
Published: 1 September 2000
Download: 
IMCA SF 05/00
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.