Dangers from insecure crane loads
This crane incident also occurred onshore, but the lessons to be learnt are equally applicable to members’ lifting operations.
During a major turn-around, fan tubes were being lifted using a tube tray. During the lift and while the tube tray was directly over the crane operator’s cab, the tube tray deviated from horizontal, causing the fan tubes to slide off. They plunged like arrows into the operator’s cab, piercing the back and seat of the operator’s chair. Amazingly the operator suffered only minor scratches to one leg.
This is a reminder that all ‘lifts’ must be taken seriously, from the lightest and least complex to the heaviest and most complex. Proper rigging and securing of loads is of vital importance and saves lives.
Safety Event
Published: 1 October 2002
Download: 
IMCA SF 10/02
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.