Skip to content

Injury involving contact with a vehicle battery

A 12 volt vehicle battery was being disconnected using a crescent wrench, which slipped and grounded out when it came in contact with metal. The person received a burn on his ring finger as his gold ring had come into contact with the wrench. The injury was completely around the ring finger and severe enough to cause concern about the loss of the finger from a lack of adequate circulation.

It has been pointed out that most vehicle batteries have 600-800 cranking amps, compared to 75 amps for stick welding and 300 amps for air arc welding. Severe burn injuries can occur and caution should be exercised when handling such batteries, including removing rings and other jewellery before starting work near or on a battery/connected wires and equipment.

Safety Event

Published: 1 February 2003
Download: IMCA SF 02/03

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.