LTI: fractured finger during anchor handling
What happened?
A crew member suffered a serious finger injury when he got his finger trapped. The incident occurred when a vessel had been installing mooring elements, suction anchors and mooring chain. Whilst handling chain, the injured person got his finger squeezed when loosening a bolt (pin) from the central part of a Kenter link (Kenter heart). He went to see the medic onboard and was treated, but was unable to do any practical work on deck the next day. When the vessel arrived back in port he was sent for X-rays, which revealed that the fingertip was fractured. He was then sent home on sick leave.
What went right
The injured person was just hired and had a positive learning attitude to the job, and felt that he was well taken care of and safe. There were personnel working around him on deck and he was a part of a “buddy” system.
What went wrong
The injured person was sitting on deck hitting the Kenter heart down to drive out the pin. The pin is a conical shape, and so it must be done the correct way or else it will be driven firmer into the Kenter heart. If this is done the correct way, the pin comes out easily. While he was hitting the heart with the pin down to a hard surface the wrong way, it didn’t loosen but slipped and his finger got squeezed/pinched between the deck/chain and Kenter heart.
What were the root causes?
Lack of training & knowledge – the injured person had previous experience on deck on various vessels, but was new to this vessel and anchor handling operations. While he had received training and he was supervised working on the aft deck. He did not know about the conic shape of the pin in the Kenter heart.
Insufficient supervision – whilst there were personnel working around him on deck and he was a part of a “buddy” system, he was not being overseen at the time of the incident;
Lack of effective risk assessment – the risk assessment for the specific job was done in the beginning of the campaign before the injured person was onboard. The team did not effectively perceive the risks in the situation and the injured person did not stop to get advice from his colleagues.
Lessons
- A higher focus on training and supervision of inexperienced or new personnel;
- Communicate incident effectively: New employees represent an increased risk of injuries and need special attention during their first shifts and time onboard. Increased activity in general, also means increased number of new employees onboard the vessels.
- Could impact gloves be helpful in some operations on deck?
Members may wish to refer to:
Safety Event
Published: 3 October 2022
Download: 
IMCA SF 22/22
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.