Life raft secured incorrectly on cradle
What happened
During an onshore visit to a vessel, it was observed that a life raft was attached/connected incorrectly to the life raft cradle. The life raft painter rope was connected to the cradle instead of to the weak link on the Hydrostatic Release Unit.
What went wrong?
It was installed incorrectly and there was no post-installation check carried out. What inspection there had been, had been a visual check of condition with no check of whether the life raft was or was not correctly installed and secured.
Actions taken
Post-installation checks and life-raft weekly inspections added to planned maintenance system.
Members may wish to refer to:
Safety Event
Published: 27 March 2023
Download: 
IMCA SF 08/23
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.