Skip to content

Compressed air rather than oxygen supplied to divers

What happened

Several divers were affected and two divers became ill when compressed air rather than oxygen was supplied to them by mistake on their BIBS (Built in Breathing System). The error caused two lymphatic/skin decompression illnesses and incorrect decompression profile for several other divers.

What went right?

  • Dive and project team reacted appropriately when decompression illness was suspected;
  • All emergency procedures were followed;
  • Once the root cause was identified and understood all work stopped and investigation and controls were conducted, and the dive and project team took the correct and required actions.

What went wrong

  • The gas supplier’s agent did not have sufficient control:
    • The wrong kind of gas was delivered – there was no check of the gas quad before it was dispatched;
    • The gas quad had incorrect labelling and colour code and was similar to the other 100% oxygen quads stored at the mobilization site;
    • The threads on the quad piping system containing compressed air were compatible with the approved medical oxygen regulator.
  • The oxygen fraction (FO2) of the third-party gas quad was not checked by the diving contractor upon delivery to site;
  • The gas quad fixed pressure manometer (pressure reading) was checked at the site of the quad on 92 occasions by 21 individuals, but no one noticed the difference of the air quad from an oxygen quad;
  • The dive system had online gas analysers on all gas types and delivery systems except for the BIBS gas supply line to chamber;
  • The team investigating the first incident did not consider the possibility of inappropriate breathing gas. This failed to identify the underlying cause and allowed a second incident to occur.

Lessons and actions

  • Better control of supplied diving gases;
  • More thorough auditing of diving gas supply chain;
  • Improve competence and training in two areas: dive technicians’ labelling of gas, and management site investigation;
  • Ensure diving gas supply and analysis equipment is fit for purpose;
  • Company added new verification requirements, based on the incident, including:
    • Can the BIBS supply be analysed on the chamber panel;
    • Does the competence scheme capture technical know-how of gas management and verification?
    • Do investigation lead/ technical advisors hold formal training in investigation?
    • Ensure regular and thorough audit of third party gas suppliers;
    • Ensure company procedures and routines comply with IMCA guidance on gas management and control

Members may wish to refer to:

Safety Event

Published: 27 November 2023
Download: IMCA SF 27/23

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.