Weld failure on Kirby Morgan KM17B 505-055 neck clamp
A member has reported that a weld on an eight-year-old Kirby Morgan neck clamp arrangement has failed.
Kirby Morgan Dive Systems has indicated to the company that this may have been caused by either inadequate bead build-up on the weld or crevice corrosion.
In either case Kirby Morgan Dive Systems stated that underwater, this failure would not cause a catastrophic failure resulting in injury or death.
It also stated that this deficiency would be detected during the daily pre- or post-dive checks providing proper pre- and post-dive checks were being done and that there was no sure way to prevent failures of any component. However, proper maintenance and inspection would in most cases identify problems before they become dangerous.
Two relevant bulletins issued by Kirby Morgan Dive Systems in 2000 and 2003 are attached.
These notices with other safety-related information are also available on the company’s website at kirbymorgan.com
Safety Event
Published: 30 July 2007
Download: 
IMCA SF 06/07
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.