Skip to content

Lost time injury (LTI) caused by inadvertent activation of expired line throwing device

A member has reported an incident in which a crewman was seriously injured when inadvertently struck by a line throwing rocket. The incident occurred when a search was made for a small diameter rope for use as a plumb line. Since no suitable rope was easily available, a member of the crew decided, without consulting anybody else, that the small diameter line from an old rocket assisted line throwing apparatus (LTA) could be used. Whilst trying to retrieve the line from the device, it slipped from the crew member’s hands, dropped to the deck and unfortunately went off. A crew member was working nearby and was inadvertently struck, causing a deep cut on his left leg near the shin.

Line throwing apparatus
Line throwing apparatus
Injured person's shin
Injured person’s shin

An investigation by the company noted the following:

  • The LTA was uncontrolled and was not on any inventory list;
  • The LTA had no safety pin or markings indicating date of manufacture, operating instructions or expiry date;
  • There was inadequate control of spares and stock leading to a shortage of rope for the task in hand;
  • The crew member took no account of the possible risk to himself and others in handling an explosive device.

The company made a number of recommendations particularly concerning pyrotechnic devices such as flares and rockets:

  • Pyrotechnics should be controlled items, stored in a safe place, and only used by appropriately trained personnel;
  • Pyrotechnics should be used only for the purpose for which they were intended or manufactured;
  • Expired or ‘out of date’ pyrotechnics should be disposed of according to local regulatory requirements, and vessel crew should be fully familiar with company procedures and requirements for disposal;

The company made a number of further recommendations:

  • Better control of work and toolbox talks might have prevented this incident;
  • Vessel crew should be aware of vessel garbage management plan;
  • Control of spares should be such that appropriate quantities of parts and stock are available for everyday operations.

Safety Event

Published: 11 December 2012
Download: IMCA SF 13/12

IMCA Safety Flashes
Submit a Report

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.

IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.

IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.