Load chain failure owing to corrosion
UK Step Change in Safety has published a bulletin regarding two incidents in which there were failures of load chains owing to corrosion. These occurred during the installation operations of primary steel under deck. The load chain failures occurred on 10 tonne chain hoists within a 10-day period. These chain hoists had been used during installation of the primary steel sections and on completion of the lifting part of the operation 4 x 12 tonne turnbuckles were attached to each section as fixed rigging.
Upon discovery of the chain failures the offshore team stopped the job, made the work site safe and reported the failures to the respective supervisor immediately. The 12Te turnbuckles remained secure at all time through the operation. Extensive investigation attributed the failures to stress corrosion cracking (SCC) due to hydrogen embrittlement.
Further information can be found at stepchangeinsafety.net/safer-conversations/safety-alerts/load-chain-failure-0
Safety Event
Published: 10 August 2016
Download: 
IMCA SF 21/16
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.