Worker trapped and injured by reversing vehicle
What happened?
An IOGP safety alert recounts how, at a land-based seismic survey camp, a worker was trapped and injured when a reversing vehicle did not stop. Someone was working as a spotter helping a crane operator reverse a mobile crane into position. As the crane reversed to approximately 1.5m from the desired position, the spotter reached for his radio to give the STOP command, but lost his balance in snowy conditions. While he regained his balance, the crane continued to reverse. As a result, the spotter was caught between the outrigger and the well house, causing an injury to his right wrist.
What went wrong? What were the causes?
- The spotter lost his balance placing him in the line of fire;
- The crane operator continued to reverse after losing visual contact with the spotter. The spotter and the crane operator had previously agreed that if visual contact was lost that they would rely on verbal communication but did not agree that the verbal communication would be constant;
- This method of positioning the crane was considered normal by the two employees;
- While moving, the crane outrigger was left extended to prevent potential hydraulic oil leaks;
- The pre-task discussion had not identified these hazards.
What lessons were learnt? What actions were taken?
- Users of mobile equipment or vehicles (cranes, fork lift trucks etc.) should establish clear communication protocols before starting work;
- Persons on the ground or on deck near moving vehicles should never allow themselves to be “in the line of fire”;
- When operating mobile equipment or vehicles, if visual or verbal contact is lost with people nearby on the ground, STOP immediately until contact is re-established and safe operation can continue.
In summary, IMCA notes that this was a wholly avoidable injury for which one causal factor was lack of communication, and as such it is of interest to IMCA members in the marine or dockside context. The IOGP Safety Alert can be found on the IOGP webiste.
Members may wish to review the following incident:
Safety Event
Published: 1 September 2017
Download: IMCA SF 22/17
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.