Electrical shock – Failure of isolations and barriers
A crew member was testing 240V cables as part of re-terminating a replacement motor. There was some isolation in place, with equipment partly out of the racks for testing by a separate crew. However, the electrical supply for a space heater was unknowingly not covered by the existing isolation in the test position. Crew member received an electrical shock whilst removing insulation from a still active 240V conductor.
What went wrong:
- Specific equipment drawing was not utilised for isolation – a generic motor drawing was used instead. Isolation integrity had not been individually assessed for different activities.
It is important to ensure that Permit to Work (PTW) and lock out/tag out procedures specify the requirement to reference equipment-specific rather than generic drawings, prior to determining the appropriate isolation.
Safety Event
Published: 2 October 2015
Download: 
IMCA SF 14/15
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.