Corrosion of band securing screw on diver band mask
A member has recently reported the failure of a band securing screw on a DSI Mrk 18B band mask. During the annual return to base for a full strip-down and service of the diver band mask, the company reported the failure of one of the band securing screws, resulting in the band falling away from the mask. The dive technician was re-assembling the unit and had already inspected both screws and considered them fit for use. While tightening one screw, the head of the screw fell off.
On closer inspection, severe corrosion could be observed where the head of the screw joined the threaded section. This corrosion was not visible prior to the failure – only slight wear of the cross-head was reported. Since then, the company concerned has instigated a full inspection of all band-securing screws with any screw showing slight wear being replaced.
Safety Event
Published: 2 April 2001
Download: 
IMCA SF 06/01
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.