Defective hammer shaft
To support a new client policy, a company was changing over to the use of fibreglass shafts for all hammers over 2lbs. One of the first to be sent offshore was a 14lb hammer. Within a short period of use, the shaft showed signs of cracking just behind the head of the hammer. Use was stopped and the defect reported.
After discussion with the supplier and the client, all fibreglass handled hammers were withdrawn and the company involved has reverted to wooden shafts.
The company involved has restated the importance of taking care in the selection of tools, noting that the latest technology may not be necessarily better than tried-and-tested equipment. It reminds personnel that good pre-use inspection remains a critical requirement not to be ignored or bypassed.
Safety Event
Published: 2 July 2003
Download: IMCA SF 07/03
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.