Grounding and flooding of ferry – complacency
The UK Marine Accident Investigation Branch (MAIB) has published a report into the grounding and flooding of the ro-ro (‘roll on roll off’) ferry Commodore Clipper in the Channel Islands in July 2014. The vessel raked over two granite pinnacles at full sea speed of about 18 knots; its hull was breached and seawater flooded into double-bottom void spaces. The grounding caused a noisy and shuddering vibration, but the crew did not immediately check for damage.
The report identifies the following safety issues:
- Insufficient passage planning meant that the bridge team were unaware of the limits of safe water where the vessel was heading, and so headed into danger without appreciation of the navigational risk. A number of issues were not properly considered:
- The very low tide;
- The effect of vessel’squat’ in shallow water at high speed;
- The accuracy of the chart data.
- The possibility that the vessel had grounded was denied. In the circumstances of a shuddering vibration, it is important that the crew establish the state of their vessel by searching for damage;
- The repetitive nature of ferry operations can induce a degree of complacency when planning;
- The electronic navigation system was not being utilised effectively because safety settings were not appropriate to the local conditions, warnings were ignored and the audible alarm was disabled;
- The local responsible port authority did not have an effective risk assessment or safety management plan for the conduct of navigation in its statutory pilotage area.
The full report can be downloadedat gov.uk/maib-reports/grounding-and-flooding-of-ro-ro-ferry-commodore-clipper
Safety Event
Published: 21 September 2015
Download: IMCA SF 13/15
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.