Improper use of lifting equipment
A member has reported the following incident. A driller was positioning a rig sub-structure base area, lifting up the front extension. The sub-structure was lower than the extension and the driller used a forklift to lift it up and push a connecting pin. He used the forklift to push the pin inside by one fork. While pushing, he started hammering the pin and the fork slid to one side and hit his right foot.
The driller suffered a fracture of his right foot.
The investigation revealed improper use of equipment conventionally used only for lifting operations and the contractor involved has reiterated that forklifts shall only be used for lifting operations and the handling of goods.
Safety Event
Published: 1 April 2002
Download: 
IMCA SF 03/02
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.