Incompatible threads on the bell onboard gas bottles
We have received a report from a diving support vessel (DSV) that during the re certification and testing of the bell onboard gas bottles, it was found that the pillar valves were incompatible with the threads on the bottles. The bottles were W28.8 x 1¼” according to DIN 477. The pillar valves were ¾” NPT.
Since it is understood that this re-certification was done in the past by a third party test house, contractors may wish to examine their own worksites to check that they do not have a similar problem.
Safety Event
Published: 2 December 2000
Download: 
IMCA SF 08/00
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.