Skip to content

IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.

Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.

Submit a Report

All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.

IMCA Contact

Nicholas Hough
Consultant - Safety and Security
Contact

Select some filters

Near-miss: Broken high pressure oxygen fitting

A member has reported that while recovering an inflated lift bag over the bow bulwarks on one of its vessels, a regulator attached to an oxygen pack was broken off […]

| Included in IMCA Safety Flash 10/02

Securing of office equipment on vessels

A member has reported the following incident which occurred onboard one of its vessels. The vessel was in heavy seas when it was hit by several 20-25′ swells, causing the […]

| Included in IMCA Safety Flash 10/02

Dangers from insecure crane loads

This crane incident also occurred onshore, but the lessons to be learnt are equally applicable to members’ lifting operations. During a major turn-around, fan tubes were being lifted using a […]

| Included in IMCA Safety Flash 10/02

Pipe stacking fatality

The following incident occurred at an onshore fabrication facility, but provides an important reminder of areas that must be considered when planning for situations where loads and stacks have the […]

| Included in IMCA Safety Flash 10/02

Loss of a vessel

We have received the following information regarding loss of a survey vessel. This loss followed the ingress of water into the ship’s engine room. There were no injuries amongst the […]

| Included in IMCA Safety Flash 09/02

Failure of bail-out regulator

During routine maintenance of bail-out bottles on a member’s dive support vessel (DSV), a serious flaw was discovered on a first stage bail-out regulator. When the relief valve was dismantled, […]

| Included in IMCA Safety Flash 09/02


Power management system dynamic positioning (DP) incident

We have received the following information from a member regarding a power management system (PMS) fault which led to a DP station keeping incident on one of its vessels. This […]

| Included in IMCA Safety Flash 07/02

Dynamic positioning (DP) vessel blackout

We have received the following information from a member regarding a DP blackout incident on one of its vessels. This safety flash outlines the incident, the learnings from the incident […]

| Included in IMCA Safety Flash 06/02

Toxic gas emission from transponder

One of our members reported an incident involving lithium chloride batteries in a transponder unit which, having been recovered from depth, released a gaseous white powder through its vent valve. […]

| Included in IMCA Safety Flash 05/02

Corrosion pitting on bailout cylinder

A member has reported that during routine inspection and maintenance of the bailout cylinder, the diving supervisor found corrosion pitting on the cylinder body hidden beneath the harness strap. The […]

| Included in IMCA Safety Flash 05/02

Lifting operation incident

A member has reported an accident that took place during an onshore drilling operation. The crew was rigging down various rig components during the rig move to a new location. […]

| Included in IMCA Safety Flash 05/02

Faulty bevel machine trolley

A member has reported that when a pipe joint was landed on a bevel station conveyor and whilst the operator was removing the sling from this pipe with his right […]

| Included in IMCA Safety Flash 05/02

Warning signs not respected

A member has reported that an electrician was on the deck of a semi-submersible crane vessel and was going to the lower part of the J-lay tower (clamp area) in […]

| Included in IMCA Safety Flash 05/02

Failure of lifeboat lowering mechanism

A member has reported that whilst lowering a lifeboat during coxswain training the bow release hook mechanism opened on contact with the water releasing the forward fall. The aft fall […]

| Included in IMCA Safety Flash 05/02

DSI air helmets – Leakage of water into regulator

We received the attached safety flash yesterday from Divex Ltd, who are distributing the information to all potential users, who should fully check and test their equipment to ensure continued […]

| Included in IMCA Safety Flash 04/02

Improper use of lifting equipment

A member has reported the following incident. A driller was positioning a rig sub-structure base area, lifting up the front extension. The sub-structure was lower than the extension and the […]

| Included in IMCA Safety Flash 03/02

Explosion of hose-ball valve assembly

A member has reported the following incident, which occurred during an onshore drilling operation. During the operation (run in hole) with a 4½” liner, the crew was instructed to fill […]

| Included in IMCA Safety Flash 03/02

Caution advised on cellphone use due to ignition fears

A member has passed on a report of an incident where a contracted specialist was working on an open panel supplying instrumentation gas. He was carrying a cellphone that was […]

| Included in IMCA Safety Flash 03/02

Guidewire anchor failure

A member has reported that during subsea operation, the upper part of a guidewire anchor disengaged from the main body of the anchor, resulting in the unintended release of the […]

| Included in IMCA Safety Flash 03/02

2255 post(s)