Skip to content

IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.

Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.

Submit a Report

All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.

IMCA Contact

Nicholas Hough
Consultant - Safety and Security
Contact

Select some filters

Inspection notice from Crosby on certain products

The Crosby Group has asked that IMCA circulate the following information as part of a Safety Flash. Crosby has been made aware (March 2023) of a few instances of hoist […]

| Included in IMCA Safety Flash 11/23

Uncontrolled movement of spreader bar

What happened A vessel was set up alongside a barge in preparation for the subsea deployment of a 16″ (40cm) spool. The spreader bar sea-fastenings were removed by the deck […]

| Included in IMCA Safety Flash 11/23

Equipment starts unexpectedly

What happened THree mechanics obtained a Lock-out/Tag-out (LOTO) for a High voltage AC unit, and were performing routine maintenance on the unit. As one of them went to lubricate the […]

| Included in IMCA Safety Flash 11/23

Near Miss: steam and water released from filter

What happened? A mechanic was given a work order to clean out strainers from a boiler circulation pump. The mechanic was got to loosening the last two bolts, and stopped […]

| Included in IMCA Safety Flash 11/23

Maintenance and control of fire doors

What happened? A member has discovered instances of mandatory fire doors onboard their vessels being  in a poor state of maintenance, and in some cases modified to alter the closing […]

| Included in IMCA Safety Flash 11/23





Near Miss – Messroom fridge fell over during rough seas

What happened During transit through heavy seas, a fridge tore loose from the messroom wall and fell on its side. The incident occurred when the vessel was transiting out to […]

| Included in IMCA Safety Flash 10/23



Hand injury from portable grinder

What happened A subcontract worker received a 3cm laceration to the hand while using a portable grinder. The incident occurred during flowline fabrication work at a spool base. The portable […]

| Included in IMCA Safety Flash 09/23

Cut and bruise to right hand whilst pressure testing

What happened A technician was pressure testing hydraulic hoses in the hydraulic workshop using the water pressure test bed. He had previously tested two hoses earlier in his shift. On […]

| Included in IMCA Safety Flash 09/23

LTI: Hand injury in galley

What happened An experienced cook in the galley badly injured his hand when his knife slipped. The incident occurred in a vessel alongside at Christmas. The cook was preparing meat […]

| Included in IMCA Safety Flash 09/23

Serious LTI – Crew member slipped on deck breaking his leg

What happened Three engineering crew members were involved in the manual handling of a bunker hose from an upper storage area to a lower deck storage area accessed via a […]

| Included in IMCA Safety Flash 08/23


Person slipped when exiting bathroom into cabin

What happened A crew member stepped out of the bathroom onto the cabin mat, when the mat slipped resulting in the crew member falling backwards, striking his lower back on […]

| Included in IMCA Safety Flash 08/23

Leak of oil-based mud

What happened? There was a spillage of oil-based mud from a vessel alongside. The leak occurred when a vessel was preparing to transfer oil-based mud to the shore base. Just […]

| Included in IMCA Safety Flash 08/23

Life raft secured incorrectly on cradle

What happened During an onshore visit to a vessel, it was observed that a life raft was attached/connected incorrectly to the life raft cradle. The life raft painter rope was […]

| Included in IMCA Safety Flash 08/23

2255 post(s)