Skip to content

IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.

Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.

Submit a Report

All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.

IMCA Contact

Nicholas Hough
Consultant - Safety and Security
Contact

Select some filters

DP run-off incident – Class 2 DP vessel

IMCA has received a report of a DP run-off caused by operational changes to the DP system which led to the loss of all reference systems. The DP class 2 […]

| Included in IMCA Safety Flash 14/06

Open lifeboat – corroded tie band side plates

IMCA has received the following report regarding corrosion to lifeboat parts which could have resulted in loss of life. An empty open lifeboat was lowered to the embarkation platform, when […]

| Included in IMCA Safety Flash 13/06


Wire break in wind sensor caused DP drive-off

A member has reported an incident in which one of its vessels suffered a DP drive-off during valve monitoring operations in open water. The wind was light – 5-10 knots […]

| Included in IMCA Safety Flash 12/06

Warning regarding Imenco Minilatch – ROV fell onto deck

IMCA has received the attached safety alert regarding the Imenco Minilatch following an incident whereby an ROV fell from its launch and retrieval latch onto the deck of the support […]

| Included in IMCA Safety Flash 11/06


Lifting wire strop failure during air bag lift

A member has reported the following incident, which occurred during a diving operation from a DP diving support vessel. The diver was asked to inflate a 5 tonne air lift […]

| Included in IMCA Safety Flash 10/06

Small fire caused by toaster in mess room

IMCA has received a report on a small fire which occurred in the mess room of a production platform. A plastic tray had been left on top of a conveyor […]

| Included in IMCA Safety Flash 09/06

Fatal accident with lifting appliance

IMCA has received a reports on a fatal incident during a lifting operation. A provisions crane was loading pallets onto a vessel using a pallet fork. After landing a pallet […]

| Included in IMCA Safety Flash 09/06

Near-miss involving Hyfex fire extinguisher refill kits

IMCA has received the attached Divex HSE alert, which members should be aware of. See https://imcaweb.blob.core.windows.net/wp-uploads/2020/06/IMCASF-09-06.pdf

| Included in IMCA Safety Flash 09/06

Serious injury during pipestalk rolling operation

A member has reported an incident that occurred recently during planned, ‘routine’ pipe stalk rolling operations at a spool base. The incident resulted in serious injuries to one person. At […]

| Included in IMCA Safety Flash 08/06

Trapped pressure release incident

A member has reported a trapped pressure release incident in a dive system transfer chamber. The incident occurred onboard a diving support vessel undergoing commissioning of its saturation diving system […]

| Included in IMCA Safety Flash 08/06

Recall due to failure of parts in Dacon Rescue Scoops

IMCA has been alerted to problems encountered with certain parts of the Rescue Scoop manufactured by Dacon a/s. This is a crane-operated rescue net for recovery of casualties from the […]

| Included in IMCA Safety Flash 07/06

Crane incident

A member has reported a crane incident on one of its vessels. A crane hook snagged a piece of piping, which was lifted as the hook was raised. The piping […]

| Included in IMCA Safety Flash 07/06



Recall of Pains Wessex white collision warning hand flares

Pains Wessex has announced a recall of its white collision warning (MK7) hand flares, item number 52651. The recall follows a recent incident in which an individual was seriously injured […]

| Included in IMCA Safety Flash 06/06

Near-miss: Missing grating on platform in fuel tank

IMCA has received a report of a near-miss involving workers entering a cargo tank. Workers descending a ladder into the tank found that there was no grating platform at the […]

| Included in IMCA Safety Flash 06/06

Isolation of fuel tanks

IMCA has been advised of a near-miss accident that occurred during a fuel transfer operation. Whilst the vessel was in dry dock, fuel was accidentally transferred into a tank in […]

| Included in IMCA Safety Flash 05/06

Hand injury sustained by diver

A member has reported an incident in which a diver sustained an injury to his hand. The incident occurring during diving operations that were part of the installation of mooring […]

| Included in IMCA Safety Flash 05/06

2255 post(s)