UK HSE: worker fell into lift shaft – safety controls bypassed
What happened?
The UK HSE prosecuted a company after a 34-year-old employee was moving a loaded lift trolley in the tool department of a hangar when he fell into the lift shaft to the bottom floor and suffered life-changing injuries. See here for HSE press release.
What were the causes? What went wrong?
Although the exact cause of the incident could not be established, the HSE investigation found that the lift doors had a fault which meant that they defaulted to locked. As a result, the emergency door release key was being routinely used by employees to bypass the fault and therefore the lift’s safety devices. (IMCA italics)
The HSE inspector said:
“Despite a fault, busy workers who were moving parts and tools felt compelled to keep the lift in use. The safety features of the lift were therefore made redundant. The lift should have been taken out of service or an alternative system of work should have been in place, and this should have been communicated.”
Members may also be interested in the IOGP Life-saving rules report 459.
Members may wish to refer to:
Safety Event
Published: 15 April 2020
Download: 
IMCA SF 13/20
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.