Use of surge protected devices on-board vessels
What happened?
A surge protected extension lead failed resulting in it overheating and burning. Surveyors heard an audible ‘snap’ and then observed that three of their monitors had lost power. The vessel electrician was called to investigate and noted that a circuit breaker in the switchboard had tripped. The electrician reset the breaker, which was then followed by a distinct burning smell coming from a 4-way extension lead on the survey desk.
The extension lead was immediately isolated and removed. This equipment was the property of the third-party survey contractor.
What went wrong?
The extension cable was protected by an anti-surge system that relied on a fixed earth and varistors to allow passage of current to earth in the event of a power spike or surge. This design is to protect the equipment connected to the extension lead during very short power spikes, typically lightning strikes, not prolonged events where overheating could occur.
Vessels use residual current devices (RCDs). These devices effectively need to see balance on each phase and in the instance of a short on either phase, will trip the breaker/RCD. When the extension lead was connected to the ships power supply, the varistors heated up until one of the phases saw more or less current, thus tripping the breaker/RCD.
What actions were taken?
- Ensure all electrical extension leads are examined to confirm compatibility with vessel electrical system;
- Remove all unsafe items from use immediately.
Members may wish to refer to:
- Surge protective devices onboard vessels  the United States Coast Guard published in April 2013 a Marine Safety Alert on surge protective devices. Subsequently, an updated and corrected version of this information was made available as Marine Safety Alert 03-13b. The alert covers the risk of fire arising from the misuse of certain voltage surge protective devices used in mains electric circuitry on-board vessels. A marine casualty investigation of two separate stateroom fires onboard a US flagged container ship revealed that the sources of the fires were attributed to the use of surge protective devices plugged into a lighting circuit.
- Near-miss: burnt out electrical socket
Safety Event
Published: 12 November 2019
Download: IMCA SF 26/19
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.