Dropped load (bottled water) during lifting operations
What happened?
During a routine lifting operation, a pallet laden with about 1 tonne of bottled water, slid off the pallet lifting forks and fell around 8 metres to the quayside area below. The banksman had to run clear of the area to avoid being struck by falling items.
How did it happen?
Inattention, complacency and failure to follow company lifting procedures with regards to lift team size.
What must you do in that situation?
- Follow company procedures and standards with regards to lifting operations;
- STOP THE JOB if worksite controls are not being followed or if work is not safe;
- Ensure sufficient barrier management is in place for lifting operations.
Members may wish to refer to:
Safety Event
Published: 16 July 2019
Download: 
IMCA SF 17/19
IMCA Safety Flashes
Submit a Report
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of all. The effectiveness of the IMCA Safety Flash system depends on Members sharing information and so avoiding repeat incidents. Please consider adding safetyreports@imca-int.com to your internal distribution list for safety alerts or manually submitting information on incidents you consider may be relevant. All information is anonymised or sanitised, as appropriate.
IMCA’s store terms and conditions (https://www.imca-int.com/legal-notices/terms/) apply to all downloads from IMCA’s website, including this document.
IMCA makes every effort to ensure the accuracy and reliability of the data contained in the documents it publishes, but IMCA shall not be liable for any guidance and/or recommendation and/or statement herein contained. The information contained in this document does not fulfil or replace any individual’s or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.