What happened A crewman was injured when a stack of assorted sheet metal and wood fell against him. The incident occurred when he was performing a safety walk round in […]
A new IMCA website has launched - www.imca-int.com
This site is available temporarily for access to the following:
˙ Event Registration - new system coming soon
˙ Membership Application - new system coming soon
˙ Store - items being finalised for existing orders
IMCA safety flashes disseminate important information on incidents and potential hazards and the lessons learnt from them that can help prevent incidents occurring elsewhere in the industry.
Individual safety events are available individually online, tagged and searchable, while the traditional PDF collections are also available for download.
All members are encouraged to contribute relevant safety-related information – please visit our Safety Flash Reporting page for details on the submission process.
Nicholas Hough
Consultant - Safety and Security
Contact
What happened A crewman was injured when a stack of assorted sheet metal and wood fell against him. The incident occurred when he was performing a safety walk round in […]
During a flexible jumper installation operation, the 1st end termination head had been transferred over the Open Vertical Laying System and deployed through the vessel moonpool ready to initiate laydown. […]
What happened During routine cargo operation on the main deck, crew were unlashing the load (an empty pipe container) when the crane operator lifted the load without warning. One crewman […]
What happened? A crewman was injured when there was an uncontrolled and unplanned closure of a fire flap. The crewman was filling an expansion tank through the engine room ventilation […]
What happened A man overboard incident occurred, in port at night. A rigger on the main deck, walking around spools secured to the main deck, stepped off the side of […]
What happened? The UK Health and Safety Executive has prosecuted a company after a worker suffered a fatal injury using high-pressure water jetting equipment for industrial cleaning purposes. An employee […]
What happened? A member reports two incidents in which persons fell off step ladders and were injured as a result. Incident 1 While climbing back down a ladder from the […]
One of our members has released this bulletin relating to a recurring practice of pilots egressing from a ship’s gangway before it has rested safely on the jetty. Such practice […]
What happened? A dropped object event occurred when a crane wireless remote control unit fell from the main deck to the ROV winch room deck below. An operator was controlling […]
What happened? Able seamen were assisting with overboarding an ROV hook (connected to the lower drum tow wire) over the stern of the vessel until it could run freely on […]
A member reports two incidences of unsafe lifting, which are worthy of note. Incident 1 Unsafe Lifting Operations By sub-contractor On a platform supply vessel (PSV) involved in demobilization operations […]
What happened? A load shifted during cargo operations, pinning a crewman’s leg between the deck and the load, causing a broken leg. The incident occurred on a vessel which was […]
What happened? A worker was injured whilst cleaning equipment using a portable handheld angle grinder fitted with a wire brush. The rotating brush caught an edge and kicked into the […]
What happened? An umbilical winch sheave was being hand-rolled along the deck when it fell over and struck the leg of one of the people handling it. Crew were rolling […]
What happened? While running in drill pipe on a drilling vessel, part of a guide sheave failed and fell approximately 15m to the drill floor. A ‘Red Zone’ was in […]
What happened? During vessel mobilization the boat cradle had to be shifted from centre of the main deck towards the starboard side closer to the accommodation. The Main Crane was […]
What happened? Whilst preparing a crane for operations, the additional man riding calliper brake casing cover on the primary winch failed, causing the brake pad, rings and cover to fall […]
What happened? Grinding machine was observed as used with damaged grinding disc. Broken disc projectile could potentially cause serious injuries. Many other workers have been injured when angle grinders have […]
What happened? In a shore-based workshop facility, the filters inside a welding fume extraction unit ignited whilst in operation. On investigating an initial smell of burning, smoke was seen escaping […]
What happened? While crew were moving lashing materials (chains, shackles and turnbuckles) from the garage deck into a storage space, the bosun suffered a serious finger injury. The incident occurred […]
359 post(s)